Premiertrak 400X/R400
Product description

New crushing plant Premiertrak 400X/R400 company is the latest installation of this type. It has a high specification, incorporating efficiency and ease of use. Versatility engineering designing allows to use this setting as the crushing of rocks, and in the processing of concrete products, showing steady productivity. Hydraulic adjustment of the size of the discharge gap between the crushing plates can control the size of the material at the outlet of the crushing chamber. This system reduces the amount of costly downtime for setup and operation of the facility. Due to the high mobility of the crushing plate promotes material into the crushing chamber, the high efficiency of crushing material. A standard set includes a well-proven, direct-drive from the engine, which allows to significantly reduce fuel consumption and operating as a result of lower operating costs.

Pipe the output of finished products can be hydraulically raised and lowered for the planned technical inspections. Sufficiently large width and height of the discharge conveyor can operate in blade. The big advantage is the presence of a reflecting plate under the crushing chamber, which in turn positively affects the duration of the conveyor belt installation.

Jaw crushingPremiertrak 400/R400 is the best option for the Recycling industry. The basis of the operating mechanism is put hydraulic overload protection nedrobyaschimsya material exceeding 200 mm.

ADVANTAGES large installation location is improved power plant and crushing chamber to regulate the height of the discharge pipeline that outputs.

Increased attention to detail is the secret installation of continuous improvement of quality. One recent innovation is a tunnel under the crushing chamber with a minimum number of bottlenecks that may accumulation of material, increased feed opening crushing chamber.

Large enough that outputs conveyor discharge height, no complicated installation units, easy setup, and more greatly facilitates the work of operators.

As additional equipment can be installed magnetic separator, conveyor output fines, remote control, reflecting the plate under the crushing chamber, the increased volume of hopper.


Optimal geometry jaw crusher with a movable cheek for maximum performance and durability at high ratio of crushing.
Very low fuel consumption, typically only 22 liters per hour, depending on the application.
Quick set up time.
Easy to transport.
High mobility with.
Quick set up.
Feed Opening - 1100 × 700 mm.
Adjust the size of the output gap: 50 - 125 mm.
Hydraulic adjustment of the gap exit slit.
Capacity up to 400 t / h
Feed hopper capacity - 10m ³.
Loading height - 4135 mm.
To reduce the transport height of the wall hopper fold hydraulically.
The walls are lined with sheets of bunker Hardoks.
Vibrating length 4080 mm, width 1060 mm with adjustable feed rate.
Dvuhdekovy Pre-Screen:
Upper deck - two-piece grate length 2120 mm, width 1060 mm and an aperture of 60 mm.
Lower deck rubber mat or a woven mesh, supplied by dopolnitellnomu order.
Discharge chute undersize material grate on the main conveyor or on the side dirt conveyor.
Main conveyor belt width - 1000 mm.
The drop height of the finished product - 3905 mm.
Hydraulic adjustment of the angle of the main conveyor.
Diesel engine Caterpillar C-9 Tier III Acert.
Engine power - 194 kW (260 hp) at 1800 r / min.
Dust suppression system.
Remote control panel.
Ladders and scaffolding for the operator.
Optional equipment:

Hydraulically folding side dirt conveyor width of 600 mm and a discharge height of 2300 mm.
Wicker screens for Pre-Screen. (Must be installed bokoboy belt).
Self-cleaning belt magnetic separator to remove material from ferromagnetic inclusions.
Cheeks with different profile crushing surface.
Increased feed tube.
Covering the walls of the hopper sheets Hardoks thickness - 15 mm.
Sensor crusher feed.
Deflector under the crusher to protect the product conveyor.
Hydraulic hammer for splitting large pieces of excess loading.
High-band conveyor.
Radio remote control system.
Belt weigher with integrator.
Water pump with hydraulic drive system for dust suppression.
Electric pump for fueling.
Working lights.
Cab for the operator.
Cameras for the crusher inlet from the cab.
Engine fire extinguisher system.
Additional platform for the operator.

Technical characteristics:
Capacity 400 t/h
Weight 44 450 kg
Inlet 1100х700 mm
Outlet 50 mm
Working width with side conveyor 4300 mm
Working length 14960 mm
Operating altitude 4135 mm
Transport width 2790 mm
Transport length 15370 mm
Transport height 3150 mm